24 June 2018

Lancia Fulvia Restoration.

This poor Italian Stallion came to use in a very sorry state. Not much steel holding it together. The customers request was to have all the rott removed and all the holes left behind filled so that they have a solid car to begin restoring. We've now finished with the cutting, patching and welding but it still has a long road ahead. We wish them the best of luck!

20180616_140418.jpg

Beuford Kit Car.

This beautiful Beuford is a faithful customer to Spunky's. We handled the wiring when the customer was building it and have helped every step of the way when our skills were needed. This week saw a visit to the customer to repair a wiring fault on another car they own, a Tiffany all the way from Las Vegas, and an investigation into an engine noise on the Beuford. The noise was the Nissan 6cyl engine's water pump. Luckily the customer had a new pump waiting so we replaced it there and then. 

20180620_132959.jpg

CBR Powered Mini

Taking shape again. This little bike engine Mini has had a huge safety upgrade to the frame as well as improvements in looks and performance. More new bars going into the rear this week. 

20180621_170005.jpg

10 June 2018

Peugeot 205 GTI6 has had a suspension overhaul. New AP coilovers at the front and the rear aaxle stripped, cleaned and rebuilt with all new bearings and shafts.

20180528_165947.jpg
20180605_115633.jpg

The Honda Fireblade powered classic Mini has had many parts machined by hand in our machine shop to mount the engine and drive box.

20180607_171856.jpg
20180607_171827.jpg

This Honda 750 Four came through the shop for a miss fire. It's had a brand new Dynatek electronic ignition system fitted.

20180608_152959.jpg

The Mk1 Transit now has a propshaft we can test with. We Cut, sleeved and welded the new to meet the old. A new one will be specially made when we're done testing. 

20180609_150044.jpg
20180421_140536.jpg